Mini excavators are easy to operate, compact, and convenient to transport. 

They can rotate freely in a space of two meters and are suitable for construction operations in more working conditions. Its versatility, 

including excavation, crushing, trench cleaning, drilling, and equipped with a bulldozer, allows for the replacement of accessories and accessories, 

greatly increasing the utilization rate of the machine and improving construction efficiency. Has very high work efficiency and cost-effectiveness.

Soil drilling: A spiral drilling machine, which uses the drill rod to drive the rotation and cutting of soil during the working process, and then lifts it to the outside of the hole to unload soil. 

It is mainly used for drilling operations on various soil types, such as tree planting, well drilling, coal sampling, etc.

Crushing hammer, also known as hydraulic crusher, is also known as blasting head in the south, mainly used for mining ore and demolishing various concrete building facilities.

Hydraulic scissors, also known as hydraulic pliers, are mainly used for demolition of buildings, with much higher efficiency than crushing hammers.

Narrow buckets can be selected for deep trench operations in rural fields with excavators.

The scarifier, also known as a ripper, is mainly used for weathered stone construction. The working conditions are layered and it is easy to use. 

The digging bucket is laborious to dig, and it is easy and wasteful to break and hammer. At this time, using a scarifier will greatly improve construction efficiency. 

First, use a scarifier to separate the soil layer or weathered stone layer, and then use a quick connector to switch the digging bucket and load it onto the vehicle.

Wood grabbers, also known as wooden grippers, are divided into hydraulic grabbers and mechanical grabbers. 

Hydraulic grabbers are also divided into hydraulic rotary grabbers and fixed grabbers. After redesigning and modifying the claws, 

the wood grabber can be used to grab stones and scrap steel, mainly for grabbing wood and bamboo. Loading and unloading trucks are very fast and convenient.

Quick connect machines, also known as quick connectors or quick conversion connectors, are specifically designed to switch between crushing hammers (or other equipment) and digging buckets. 

Generally, skilled operators can switch equipment in no more than 30 seconds, while in the past, it took 40 to 60 minutes and required two or more people to operate.

Lotus claw, also known as hydraulic claw, is mainly used as an automatic material grabbing device, which is essential in various engineering loading and unloading. 

It can load and unload a large amount of bulk materials on site, such as production and domestic waste, scrap iron, scrap steel, and other solid waste, achieving rapid transportation and conversion of solid waste.

The working principle of a small vibration compactor is to use a hydraulic motor to drive the eccentric mechanism to rotate. 

The vibration generated by the rotation is applied to the compacted material through the compaction plate, making it compact. 

The vibration compactor is easy to operate and has good compaction effect, mainly used to compact slope roads, water conservancy dams, building foundations, etc. 

Suitable for materials with low adhesion between compacted particles, such as river sand, crushed stone, asphalt, etc.

Micro excavators can quickly install crushing hammers, spiral drills, scarifiers, vibrating compactors, various fixtures, etc. 

for road surface or indoor decoration crushing work. They can also dig pits during tree planting and loosen soil for agricultural greenhouses. 

Equipped with adjustable bulldozers, they can level agricultural land.